Micro-Blaze FOG Applications

Commercial / Institutional Kitchen Areas

Micro-Blaze® F·O·G can be used as an effective, economical and ecologically safe floor cleaner in kitchen environments. Instead of harmful caustic chemicals, it is comprised of natural microbes that love to digest greases, fats and oils. This natural bio-formulation gives you more than a clean floor. Take a look at the advantages of using Micro-Blaze® F·O·G.

• Safer Work Environment
  Eliminates slipping and sliding in the kitchen and dining room areas, resulting in fewer accident claims.
• Maintains Regulatory Compliance
  Helps maintain constant compliance with regulatory authorities such as the health departments, state environmental agencies, EPA, avoiding those large surcharges.
• Eliminates Odors and Stains
  Can be used on carpets and fabrics to remove the residue and odor of spills such a milk, vomit, pet urine, blood, wine, coffee, etc.
• Cleans Exteriors
  Cleans and deodorizes dumpster area, sidewalks and oil spots in the drive-thru area.
• Reduces Monthly Budget
  Micro-Blaze® F·O·G will take the place of most cleaning products. Daily use can help reduce your plumbing maintenance and pumping requirement for grease traps (depending on dirt and trash accumulation).
• Helps Save the Planet
  Contribute to the improvement of the local environment as this natural, ecologically safe cleanser is released into your city's main sewer lines.
• Tested and Certified by NSF International
  Micro-Blaze® F·O·G is certified for use as a general cleaner [A1], and as a floor and wall cleaner for use in all departments [A4].

Helps Septic Systems Run Right!

A septic system can be a real headache for a homeowner. Off-odors, clogs and tank cleanouts are costly and time consuming chores that most people would like to avoid.

Keep septic systems and drain lines running and odor free with new, environmentally sound Micro-Blaze® F·O·G.

Applying Micro-Blaze® F·O·G into a septic system on a monthly basis helps households cut out odor problems and slow drains often associated with this type of wastewater treatment.

• Easy to Use
• Pleasant Smell
• Will Not Discolor Surfaces or Fittings
• Rids System and Lines of Off-Odors
• Will Not Corrode Pipes and Lines
• Will Not Etch Plastic, Porcelain, or Tile Surfaces

High amounts of greases and oils can overpower your systems, clogging the field lines, causing that "sewage smell" and even creating backups into the house. Large amounts of bleaches and other caustic cleaners can impact a septic systems efficiency.

Directions: For 500- to 1000-gallon systems, an initial inoculation of a total of one quart of fresh-scented Micro-Blaze® F·O·G poured down among the house lines can remedy the situation, replenishing the system with millions of beneficial microbes that help cut down the septic system tank scum buildup and knock out odors. Thereafter, add a total of 8 ounces monthly divided among the house lines to keep the system free-flowing and free from odor buildup.

Procedures and Application Rates:

• 1.Pump out the grease trap prior to starting the initial treatment.
• 2.Prime the grease trap by adding 1 quart of Micro-Blaze® F·O·G, concentrate directly in the floor drain that goes into the grease trap.
• 3.Daily dosage thereafter at a minimum of 20 ounces per day up to 32 ounces per day of Micro-Blaze® F·O·G concentrate, depending on the number of meals prepared per day and the volume of the grease trap. May also be dispensed by automatic pump system or by floor mopping or by a combination of the two.
• 4.It is advised to apply the Micro-Blaze® F·O·G with an automatic pump dosing unit to ensure proper dosages on a daily basis. Micro-Blaze® F·O·G can also be used in the mop bucket by adding 20 ounces to 32 ounces to the water in a standard commercial size mop bucket [35-44 quart capacity] to mop floors. After mopping, pour the remaining contents of the mop bucket down the floor drain to treat the drain line and the grease trap.

• 1.Apply Micro-Blaze® F·O·G at selected pumping stations collection lines as far up the line from the treatment plant as possible using a metered pump or automated drip system at the rate of 1 gallon for each 1 million gallons of influent per each 24 hours.
• 2.Apply the Micro-Blaze® F·O·G at as many pump stations around the entire collection system as desired or needed so that the cumulative daily dosage equates to approximately 1 gallon of Micro-Blaze® F·O·G for each 1 million gallons of influent processed each 24 hours by the wastewater treatment plant.

NOTE: Limit the use of bleaches, sanitizers, and other strong chemicals as they can limit or eliminate the effectiveness of the microbes in Micro-Blaze® F·O·G.